| | Sector | abcCivil Works | Tender Value | INR 9.52 Lakhs | | Location | Rajasthan - India | Ref.No | 86735945 | | Closing Date | 03 - Sep - 2025 | | | | ) Renovation work of District Statistical Office Building at Pratapgarh (Raj.) ,2.0 ,PART "A" MAINTENANCE WORK ,Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1 4 (1 cement 4 coarse sand) ,Plaster on new surface on walls in cement sand mortar 14 including racking of joints etc. complete fine finish 20mm thick . ,Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 4 ( 1 cement 4 coarse sand) ,Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. ,P&F rigid PVC Pipe (IS4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. ,110 mm dia ,Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) ,New Plastered Surface (three or more coats) ,Old Plastered Surface (two or more coats) ,Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding Old work (One or more coats ) ,Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. ,Old work (One or more coats ) ,Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision ,Old Work ,Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work ,Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete 20 mm ,Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) ,Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. ,Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) ,Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate ,Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. ,Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide ,Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm ,Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|