|
Product Detail :
|
Providing Internal Storm Water Drainage in Sector-u.e. Karnal Prov and Laying of Rcc Pipe Const of Manhole Complete in All Respect and All Other Works Contingent Thereto Including Three Year Mtc/defect Liability Period Free of Cost Ac Rs Lacs , 2.0 , [10.7]providing and Laying of Conglomerate Floor 50mm Thick Cement Concrete Topping 124 [through Rate] , [11.5.1]12 Mm Cement Plaster of Mix 1. 12 (1 Cement 2 Fine Sand) [through Rate] , [11.52]cement Rendering on Plaster 1 Mm Thick [through Rate] , [13.29.2]steel Work Welded in Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing in Position and Applying a Priming Coat of Approved Steel Primer Using Structural Steel Etc. as Required. 2. in Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates and Similar Works [through Rate] , [20.26.2]cutting Holes Up to 23 Cm Through Stone Masonry Or Brick Work in Cement Walls for Pipes and Making Good Including Repointing, Replastering and Finishing According to Existing Finish Where Required. 2. 22.86 Cm Thick Wall [through Rate] , [20.56.1]providing and Screwing in Brass/gun Metal Ferrules Drilling and Tapping Cast Iron /d.i. /g.i. Pipe Lines of All Diameters and Connections Including Carriage, Loading, Unloading Etc. Complete in All Respects to the Satisfaction of Engineer-in- Charge. (excavation Will Be Paid Separately). 1. 6mm I/d Ferrule [through Rate] , [20.7.5]stringing Out A.c./p.v.c Pipes and Specials Casting Along Trenches and Laying the Same in Trenches, to Correct Alignment and Gradients Including Cartage From Divisional Stores Or Nearest Railway Station to Site of Works and Return of Pieces of Pipes to Stores. 5. 150 Mm Internal Diameter of Pipe Line Laid Complete [through Rate] , [20.8.5]jointing A.c./p.v.c. Pipes and Specials with Cast Iron Detachable Joints/split Coupler P.v.c. Joints Fitted with Bolts and Nuts Excluding Cost of Detachable Joints/ Split Coupler P.v.c. Joints Rubber Rings, Bolts and Nuts But Including Cost of Labour and Tools Etc. and Tested Complete. 5. 150 Mm I/d Pipe [through Rate] , [21.28]providing and Fixing Steel Bar Embedded Plastic Steps of Size 263mm X 165mm of Orange Colour, Confirming to Specification in Pump Chambers, Manholes Etc., Having Minimum 3mm Thick Polypropylene Polymer Confirming to Is10910 Encapsulated on 12mm Dia Ribbed Steel Bars Per is 1786. the Rate Include Cost of Setting the Same to Correct Lines and Levels Duly Embedded in 124 Cement Concrete Including Carriage, Loading, Uploading, Stacking, Handling, Re-handling Etc., Complete in All Respect to the Satisfaction of Engineer-in-charge [through Rate] , [21.93.1]providing and Fixing Sfrc Manhole Covers and Frames Marked with Is 12592 Including Setting the Same to Correct Lines and Levels in 13 Cement Sand Mortar Over Manhole Including Carriage Loading Unloading Stacking Handling Re-handling Etc. Complete in All Respects to the Satisfaction to the Engineer-in-charge. 1. Type- Extra Heavy Duty Set (ehd-35) 560mm Clear Opening [through Rate] , [21.95.1]providing Lowering Cutting Jointing and Testing Rcc Pipe Class Np3 as Per Is-458-2003 with Spigot and Socketed Joints Manufactured with Isi Marked Sulphate Resistance Cement as Per Isi 12330 with Rubber Rings Isi Marked Antiternmite as Required at Site in to Trenches for All Depths and Laying Out the Same to Correct Alignment Gradients and Levels Including Dressing and Trimming and Cutting of Concrete Beds and Side of Trenches, If Required Jointing with Rubber Rings in Trenches and Jointing with 13/2 Cement Sand Mortar and with End Dowels Filled with 13/2 Cement Sand Mortar and Finishing the Joints at An Angle of 45 Degree with Faces of Spigot of Socket Joints Cutting and Finishing the Cut Surface to a Uniform Finish Etc. as Fully Described in Item No. 21.38, Item 21.44, Item 21.45, and Item 21.46 Including Cartage Loading and Unloading Complete in All Respects. the Internal Diametric of the Sewer Being 1. 350 Mm [through Rate] , [21.95.2]providing Lowering Cutting Jointing and Testing Rcc Pipe Class Np3 as Per Is-458-2003 with Spigot and Socketed Joints Manufactured with Isi Marked Sulphate Resistance Cement as Per Isi 12330 with Rubber Rings Isi Marked Antiternmite as Required at Site in to Trenches for All Depths and Laying Out the Same to Correct Alignment Gradients and Levels Including Dressing and Trimming and Cutting of Concrete Beds and Side of Trenches, If Required Jointing with Rubber Rings in Trenches and Jointing with 13/2 Cement Sand Mortar and with End Dowels Filled with 13/2 Cement Sand Mortar and Finishing the Joints at An Angle of 45 Degree with Faces of Spigot of Socket Joints Cutting and Finishing the Cut Surface to a Uniform Finish Etc. as Fully Described in Item No. 21.38, Item 21.44, Item 21.45, and Item 21.46 Including Cartage Loading and Unloading Complete in All Respects. the Internal Diametric of the Sewer Being 2. 400 Mm [through Rate] , [21.95.4]providing Lowering Cutting Jointing and Testing Rcc Pipe Class Np3 as Pe
|
| Tender Detail : |
Providing internal storm wa... #*. Providing Storm Water Drainage System |